Bond strength of substrate with repair material for masonry structures: Scientometric Analysis and Literature Review

Khyati Saggu; Shilpa Pal; Nirendra Dev

doi:10.57159/gadl.jcmm.2.6.230107

Authors

Khyati Saggu Department of Civil Engineering, Delhi Technological University, New Delhi, India 110042
Shilpa Pal Department of Civil Engineering, Delhi Technological University, New Delhi, India 110042
Nirendra Dev Department of Civil Engineering, Delhi Technological University, New Delhi, India 110042

DOI:

https://doi.org/10.57159/gadl.jcmm.2.6.230107

Keywords:

Repair Material, Mortar, Bond Strength, Co-citation Analysis, Characterization

Abstract

Masonry infrastructure repair is a daunting challenge. The short intervention and limited resources have led to the loss of novel rendering and finishing materials. In the present study, the bibliometric analysis is conducted for period 2003 to 2022. Co-cited reference analysis, keywords, cluster, and temporal evolution were used for analysis using Citespace software. Additionally, summary of suitable content showed that major challenges in this field are disparities in the properties of old mortar and new materials and the lack of documents to understand nature and methodology of construction. Based on the analysis and content review, a suggestive technique is proposed inculcating four aspects: Finite element analysis, preparing numerical models, improvised techniques for bonding mechanisms and understanding mechanical attributes.

References

A. Moropoulou and A. Bakolas, “Criteria and methodology for restoration mortars compatible to the historic materials and structures,” 2000. Accessed: Mar. 01, 2023.

“The world heritage fund / le fonds du patrimoine mondial statement of assessed contributions as at 30 November 2022 / etat des contributions mises en recouvrement au 30 novembre 2022.”

G. Ma, L. Wang, and Y. Ju, “State-of-the-art of 3D printing technology of cementitious material—an emerging technique for construction,” Sci China Technol Sci, vol. 61, no. 4, pp. 475–495, 2018.

M. E. Loke, K. Pallav, and R. Haldenwang, “Characterisation of heritage cementing materials for restoration purposes: A review,” Journal of the South African Institution of Civil Engineering, vol. 62, no. 1, pp. 10–21, 2020.

D. Y. Wu, S. Meure, and D. Solomon, “Self-healing polymeric materials: A review of recent developments,” Progress in Polymer Science, vol. 33, no. 5, pp. 479–522, 2008.

C. Ince, M. A. Carter, and M. A. Wilson, “The water retaining characteristics of lime mortar,” Materials and Structures, vol. 48, no. 4, pp. 1177–1185, 2015.

S. Feng, H. Xiao, and H. Li, “Comparative studies of the effect of ultrahigh-performance concrete and normal concrete as repair materials on interfacial bond properties and microstructure,” Engineering Structures, vol. 222, p. 111122, 2020.

I. D. Gavardinas, A. Athanasoulas, K. Spanos, A. D. Giannoukas, and A. E. Giannakopoulos, “Novel methods for the mechanical characterization of patches used in carotid artery repair,” Materials Science and Engineering C-Materials for Biological Applications, vol. 93, pp. 640–648, 2018.

A. Dalalbashi, B. Ghiassi, and D. v. Oliveira, “Freeze-thaw effects on the performance of TRM-strengthened masonry,” Journal of Building Engineering, vol. 59, p. 105077, 2022.

F. Bompadre and J. Donnini, “Fabric-reinforced cementitious matrix (FRCM) carbon yarns with different surface treatments embedded in a cementitious mortar: Mechanical and durability studies,” Materials, vol. 15, no. 11, p. 3927, 2022.

A. Khaloo, H. Moradi, A. Kazemian, and M. Shekarchi, “Experimental investigation on the behavior of RC arches strengthened by GFRP composites,” Construction and Building Materials, vol. 235, p. 117519, 2020.

A. N. Al-Gemeel, Y. Zhuge, and O. Youssf, “Experimental investigation of basalt textile reinforced engineered cementitious composite under apparent hoop tensile loading,” Journal of Building Engineering, vol. 23, pp. 270–279, 2019.

S. Feng, H. Xiao, R. Zhang, and C. Yang, “Bond performance between substrate concrete and repair mortar: Effect of carbon fibre and expansive agent,” Construction and Building Materials, vol. 250, 2020.

A. Koutous and E. Hilali, “Reinforcing rammed earth with plant fibers: A case study,” Case Studies in Construction Materials, vol. 14, p. e00514, 2021.

N. Bianco, A. Calia, G. Denotarpietro, and P. Negro, “Hydraulic mortar and problems related to the suitability for restoration,” Periodico di Mineralogia, vol. 82, no. 3, pp. 529–542, 2013.

D. G. Aggelis, “Damage characterisation of inhomogeneous materials: Experiments and numerical simulations of wave propagation,” Strain, vol. 47, no. 6, pp. 525–533, 2011.

R. Lumantarna, D. T. Biggs, and J. M. Ingham, “Compressive, flexural bond, and shear bond strengths of in situ New Zealand unreinforced clay brick masonry constructed using lime mortar between the 1880s and 1940s,” Journal of Materials in Civil Engineering, vol. 26, no. 4, pp. 559–566, 2014.

R. Skominas, V. Gurskis, R. Sadzevicius, V. Damulevicius, and A. Radzevicius, “Evaluation of cement mortar suitability for repairing concrete in hydraulic structures,” KSCE Journal of Civil Engineering, vol. 21, no. 7, pp. 2814–2820, 2017.

A. Mallat and A. Alliche, “Mechanical investigation of two fiber-reinforced repair mortars and the repaired system,” Construction and Building Materials, vol. 25, no. 4, pp. 1587–1595, 2011.

R. D. F. Moreira, M. de Moura, M. A. v. Figueiredo, R. L. Fernandes, and J. P. M. Goncalves, “Characterisation of composite bonded single-strap repairs under fatigue loading,” International Journal of Mechanical Sciences, vol. 103, pp. 22–29, 2015.

J. T. Kolawole, O. B. Olalusi, and A. J. Orimogunje, “Adhesive bond potential of compressed stabilised earth brick,” Structures, vol. 23, pp. 812–820, 2020.

K. Labropoulos and A. Moropoulou, “Ground penetrating radar investigation of the bell tower of the Church of the Holy Sepulchre,” Construction and Building Materials, vol. 47, pp. 689–700, 2013.

F. Qamar, T. Thomas, and M. Ali, “Improvement in lateral resistance of mortar-free interlocking wall with plaster having natural fibres,” Construction and Building Materials, vol. 234, p. 117387, 2020.

M. A. Salas, J. Gadea, S. Gutiérrez-González, M. Horgnies, and V. Calderón, “Recycled polyamide mortars modified with non-ionic surfactant: physical and mechanical strength after durability tests,” Materials and Structures, vol. 49, no. 8, pp. 3385–3395, 2016.

M. Asad, M. Dhanasekar, T. Zahra, and D. Thambiratnam, “Characterisation of polymer cement mortar composites containing carbon fibre or auxetic fabric overlays and inserts under flexure,” Construction and Building Materials, vol. 224, pp. 863–879, 2019.

A. Dalalbashi, B. Ghiassi, and D. v. Oliveira, “Textile-to-mortar bond behaviour in lime-based textile reinforced mortars,” Construction and Building Materials, vol. 227, p. 116682, 2019.

L. Bogoviku and D. Waldmann, “Experimental investigations on the interfacial bond strength of the adhered mortar paste to the new mortar paste in a recycled concrete matrix,” Construction and Building Materials, vol. 347, p. 128509, 2022.

L. Czarnecki, R. Gerylo, and K. Kuczynski, “Concrete repair durability,” Materials, vol. 13, no. 20, p. 4535, 2020.

M. A. Starnes, N. J. Carino, and E. Kausel, “Preliminary thermography studies for quality control of concrete structures strengthened with fiber-reinforced polymer composites,” Journal of Materials in Civil Engineering, vol. 15, no. 3, pp. 266–273, 2003.

D. Cairovic, A. de la Fuente, M. Zlamal, J. Venclovsky, F. Girgle, O. Janus, and P. Stepanek, “Suitability of different tests for characterization of the dimpled concrete-to-concrete interface,” Structural Concrete, vol. 22, no. 2, pp. 757–774, 2021.

K. V. M. Rao, B. V. V. Reddy, and K. S. Jagadish, “Flexural bond strength of masonry using various blocks and mortars,” Materials and Structures, vol. 29, no. 2, pp. 119–124, 1996.

L. Toniolo, A. Paradisi, S. Goidanich, and G. Pennati, “Mechanical behaviour of lime based mortars after surface consolidation,” Construction and Building Materials, vol. 25, no. 4, pp. 1553–1559, 2011.

D. Badagliacco, B. Megna, and A. Valenza, “Induced modification of flexural toughness of natural hydraulic lime based mortars by addition of giant reed fibers,” Case Studies in Construction Materials, vol. 13, p. e00425, 2020.

B. Li and E. S. S. Lam, “Influence of interfacial characteristics on the shear bond behaviour between concrete and ferrocement,” Construction and Building Materials, vol. 176, pp. 462–469, 2018.

J. L. Parracha, J. Lima, M. T. Freire, M. Ferreira, and P. Faria, “Vernacular earthen buildings from Leiria, Portugal - material characterization,” International Journal of Architectural Heritage, vol. 15, no. 9, pp. 1285–1300, 2021.

K. Horníková, L. Scheinherrová, R. Štefan, and M. Foglar, “Experimental investigation of physical, thermal, hygral and mechanical properties of cementitious composites at high temperatures,” Construction and Building Materials, vol. 255, p. 119244, 2020.

H. Brocken and T. G. Nijland, “White efflorescence on brick masonry and concrete masonry blocks, with special emphasis on sulfate efflorescence on concrete blocks,” Construction and Building Materials, vol. 18, no. 5, pp. 315–323, 2004.

A. Momayez, M. R. Ehsani, A. A. Ramezanianpour, and H. Rajaie, “Comparison of methods for evaluating bond strength between concrete substrate and repair materials,” Cement and Concrete Research, vol. 35, no. 4, pp. 748–757, 2005.

G. S. Pavan, S. N. Ullas, and K. S. Nanjunda Rao, “Shear behavior of cement stabilized rammed earth assemblages,” Journal of Building Engineering, vol. 27, p. 100966, 2020.

X. Ding and Z. Yang, “Knowledge mapping of platform research: a visual analysis using VOSviewer and CiteSpace,” Electronic Commerce Research, vol. 22, no. 3, pp. 787–809, 2022.

F. Focacci and C. Carloni, “Periodic variation of the transferable load at the FRP-masonry interface,” Composite Structures, vol. 129, pp. 90–100, 2015.

A. Miltiadou-Fezans and T. P. Tassios, “Penetrability of hydraulic grouts,” Materials and Structures, vol. 46, no. 10, pp. 1653–1671, 2013.

N. Bianco, A. Calia, G. Denotarpietro, and P. Negro, “Hydraulic mortar and problems related to the suitability for restoration,” Periodico di Mineralogia, vol. 82, no. 3, pp. 529–542, 2013.

H.-S. Youm, W.-Y. Lim, S.-G. Hong, and C. Joh, “Interface shear strength between ultra-high-performance concrete and normal-strength concrete,” ACI Structural Journal, vol. 118, no. 2, pp. 287–298, 2021.

G. Peng, D. Niu, X. Hu, B. Pan, and S. Zhong, “Experimental study of the interfacial bond strength between cementitious grout and normal concrete substrate,” Construction and Building Materials, vol. 273, 2021.

A. D. Espeche and J. Leon, “Estimation of bond strength envelopes for old-to-new concrete interfaces based on a cylinder splitting test,” Construction and Building Materials, vol. 25, no. 3, pp. 1222–1235, 2011.

S. Tringali, “The partial reconstruction design of the cathedral of Noto,” Construction and Building Materials, vol. 17, no. 8, pp. 595–602, 2003.

L. K. Sing, N. Yahaya, A. Valipour, L. Zardasti, S. N. A. Azraai, and N. M. Noor, “Mechanical properties characterization and finite element analysis of epoxy grouts in repairing damaged pipeline,” Journal of Pressure Vessel Technology-Transactions of the ASME, vol. 140, no. 6, 2018.

P. F. G. Banfill, E. M. Szadurski, and A. M. Forster, “Deterioration of natural hydraulic lime mortars, II: Effects of chemically accelerated leaching on physical and mechanical properties of carbonated materials,” Construction and Building Materials, vol. 111, pp. 182–190, 2016.

M. Malena, M. Sangirardi, and G. de Felice, “Steel reinforced grout under uniaxial load: Experimental evidences and numerical modelling,” Construction and Building Materials, vol. 227, p. 116808, 2019.