Enhancing Aluminum Matrix Composites with Hexagonal Boron Nitride (hBN) Particulates
A Mini Review
DOI:
https://doi.org/10.57159/gadl.jcmm.2.5.23089Keywords:
Hexagonal Boron Nitride, Aluminum Matrix Composites, Mechanical Properties, Manufacturing Techniques, Environmental SustainabilityAbstract
This present mini review article elucidates the role of hexagonal boron nitride (hBN) particulates in enhancing the properties of aluminum matrix composites (AMCs). The article delves into various methodologies for incorporating hBN, such as powder metallurgy and stir casting, emphasizing theoretical aspects and process parameters. It synthesizes data from numerous studies to illustrate improvements in mechanical and tribological properties imparted by hBN. Furthermore, the article provides a theoretical analysis of the distribution of hBN within the aluminum matrix and its impact on composite performance. Future research directions are outlined, including exploration of novel composite materials and advanced manufacturing techniques. The environmental implications of utilizing hBN in AMCs are also discussed, highlighting sustainability and recyclability concerns. This review is a significant resource for researchers and industry professionals in material science, offering insights into current trends and future potentials of hBN-enhanced AMCs.
References
S. C. Vettivel, N. Selvakumar, and P. Vijay Ponraj, "Mechanical behaviour of sintered Cu-5% W nano powder composite," Procedia Engineering, vol. 38, pp. 2874–2880, 2012, Elsevier.
P. P. N. K. V. Rambabu, N. Eswara Prasad, V. V. Kutumbarao, and R. J. H. Wanhill, "Aluminium alloys for aerospace applications," in Aerospace Materials and Material Technologies: Volume 1: Aerospace Materials, pp. 29–52, 2017, Springer.
D. Charles, "Potential aerospace applications for metal matrix composites," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 206, no. 2, pp. 105–110, 1992, SAGE Publications Sage UK: London, England.
S. Ayyanar, A. Gnanavelbabu, K. Rajkumar, and P. Loganathan, "Studies on high temperature wear and friction behaviour of AA6061/B4C/hBN hybrid composites," Metals and Materials International, vol. 27, pp. 3040–3057, 2021, Springer.
J. Jiang and Y. Wang, "Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano-sized SiC/7075 aluminum matrix composite prepared by ultrasonic-assisted semisolid stirring," Materials Science and Engineering: A, vol. 639, pp. 350–358, 2015, Elsevier.
C. Jin, F. Lin, K. Suenaga, and S. Iijima, "Fabrication of a freestanding boron nitride single layer and its defect assignments," Physical Review Letters, vol. 102, no. 19, 195505, 2009, APS.
K. A. Verma, S. K. Kumar Swami, G. K. B. Nair, and U. K. Ravella, "ALUMINUM MMCS REINFORCED WITH HBN," Int. J. Mech. Eng. Technol., vol. 8, no. 7, pp. 1532–1539, 2017.
J. M. Mistry and P. P. Gohil, "An overview of diversified reinforcement on aluminum metal matrix composites: Tribological aspects," Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, no. 3, pp. 399–421, 2017, SAGE Publications Sage UK: London, England.
M. K. Akbari, H. R. Baharvandi, and K. Shirvanimoghaddam, "Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites," Materials & Design (1980-2015), vol. 66, pp. 150–161, 2015, Elsevier.
F. Khodabakhshi, A. Simchi, A. H. Kokabi, M. Nosko, F. Simančik, and P. Švec, "Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles," Materials Science and Engineering: A, vol. 605, pp. 108–118, 2014, Elsevier.
G. N. Kumar, R. Narayanasamy, S. Natarajan, S. P. K. Babu, K. Sivaprasad, and S. Sivasankaran, "Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature," Materials & Design, vol. 31, no. 3, pp. 1526–1532, 2010, Elsevier.
I. Topcu, H. O. Gulsoy, N. Kadioglu, and A. N. Gulluoglu, "Processing and mechanical properties of B4C reinforced Al matrix composites," Journal of Alloys and Compounds, vol. 482, no. 1-2, pp. 516–521, 2009, Elsevier.
A. E. P. A. Baradeswaran and A. Elaya Perumal, "Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites," Composites Part B: Engineering, vol. 54, pp. 146–152, 2013, Elsevier.
X. Zhu, X. Wei, Y. Huang, F. Wang, and P. Yan, "High-temperature friction and wear properties of NiCr/hBN self-lubricating composites," Metals, vol. 9, no. 3, 356, 2019, MDPI.
N. Lokesh, K. B. Girish, S. H. Manjunath, and B. K. Narendra, "Study on Mechanical Properties of hBN Reinforced Al-7075 Metal Matrix Composite," 2022, International Journal for Research in Applied Science & Engineering.
S. Rajkumar, B. Arulmurugan, A. Teklemariam, D. Tafesse, A. Mekonnen, and L. Mulugeta, "Investigation on mechanical properties of AA2024/HBN composites prepared by stir casting method," Materials Today: Proceedings, vol. 47, pp. 396–399, 2021, Elsevier.
J. Joel, P. Jeyapandiarajan, A. Xavior, R. Harshitha, R. Sreekumar, and P. Raju, "Surface modification of hBN reinforced aluminum alloy Al 2024 through friction stir processing," Journal of Physics: Conference Series, vol. 2198, no. 1, 012047, 2022, IOP Publishing.
P. Loganathan, A. Gnanavelbabu, and K. Rajkumar, "Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique," Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 235, no. 1, pp. 149–160, 2021, SAGE Publications Sage UK: London, England.
S. Ayyanar, A. Gnanavelbabu, K. Rajkumar, and P. Loganathan, "Studies on high temperature wear and friction behaviour of AA6061/B4C/hBN hybrid composites," Metals and Materials International, vol. 27, pp. 3040–3057, 2021, Springer.
E. B. Moustafa, A. V. Mikhaylovskaya, M. A. Taha, A. O. Mosleh, "Improvement of the microstructure and mechanical properties by hybridizing the surface of AA7075 by hexagonal boron nitride with carbide particles using the FSP process," Journal of Materials Research and Technology, vol. 17, pp. 1986–1999, 2022, Elsevier.
S. Rakshath, B. Suresha, R. S. Kumar, I. Saravanan, "Dry sliding and abrasive wear behaviour of Al-7075 reinforced with alumina and boron nitride particulates," Materials Today: Proceedings, vol. 22, pp. 619–626, 2020, Elsevier.
N. M. Siddesh Kumar, "Effect on wear property of aluminium metal matrix composite reinforced with different solid lubricants: a review," International Journal of System Assurance Engineering and Management, pp. 1–9, 2022, Springer.
Y. Wang, Y. Zhu, R. Li, H. Liu, W. Liu, P. He, "High-performance aluminum-based matrix composites reinforced with high content of boron nitride nanosheets," Journal of Alloys and Compounds, vol. 906, 164358, 2022, Elsevier.
R. Palanivel, I. Dinaharan, R. F. Laubscher, J. Paulo Davim, "Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing," Materials & Design, vol. 106, pp. 195–204, 2016, Elsevier.
K. L. Firestein, A. E. Steinman, I. S. Golovin, J. Cifre, E. A. Obraztsova, A. T. Matveev, A. M. Kovalskii, O. I. Lebedev, D. V. Shtansky, D. Golberg, "Fabrication, characterization, and mechanical properties of spark plasma sintered Al–BN nanoparticle composites," Materials Science and Engineering: A, vol. 642, pp. 104–112, 2015, Elsevier.
V. Rao, P. Periyaswamy, A. Bejaxhin, E. Naveen, N. Ramanan, and A. Teklemariam, "Wear Behavioral Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis," Journal of Nanomaterials, vol. 2022, 2022, Hindawi.
T. Zhou, J. Dai, Z. Xiao, W.-T. Qiu, Q. Lei, X. Liu, L. Qin, and M. Ma, "Interface microstructure and tribological behaviors of copper matrix composites with high graphite content prepared by short-process reduction and vacuum hot pressing," JOM, vol. 74, no. 5, pp. 2094–2105, 2022, Springer.
J. Singh, N. Alba-Baena, R. Trehan, and V. S. Sharma, "Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite," Journal of Materials Engineering and Performance, vol. 31, no. 6, pp. 4887–4901, 2022, Springer.
S. Thomas, N. Menachery, L. P. Thomas, S. N, P. Kumar GS, and G. S. Hebbar, "Influence of nano hexagonal boron nitride on the wear properties of aluminium alloy," Advances in Materials and Processing Technologies, pp. 1–17, 2023, Taylor & Francis.
Downloads
Published
How to Cite
License
Copyright (c) 2023 Journal of Computers, Mechanical and Management
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Journal of Computers, Mechanical and Management applies the CC Attribution- Non-Commercial 4.0 International License to its published articles. While retaining copyright ownership of the content, the journal permits activities such as downloading, reusing, reprinting, modifying, distributing, and copying of the articles, as long as the original authors and source are appropriately cited. Proper attribution is ensured by citing the original publication.
Accepted 2023-09-05
Published 2023-10-31
The journal is licensed under an 