A Mini-Review of the Environmental Footprint of Lithium-Ion Batteries for Electric Vehicles
DOI:
https://doi.org/10.57159/gadl.jcmm.2.3.23068Keywords:
Sustainability, Electric Vehicles, Emissions, Public Transit, Lithium-ion BatteriesAbstract
The pressing requirement to combat climate change and reduce greenhouse gas emissions has catalyzed the development of sustainable mobility solutions. This review presents a detailed analysis of the environmental issues associated with traditional transportation systems, highlighting the significant role of sustainable mobility in addressing these challenges. Important strategies, including electric vehicles (EVs), mass transit, active transportation, and innovative mobility options, are examined. The review accentuates the necessity to cultivate more habitable communities, diminish emissions, enhance air quality, elevate energy efficiency, and contribute to a prosperous future through the adoption of sustainable mobility. The transition to sustainable transportation necessitates comprehensive policies, enabling regulations, and public participation. The creation and implementation of sustainable mobility strategies, the promotion of cleaner products and methods, and the fostering of collaboration across various sectors are pivotal roles for governments, legislators, and stakeholders. Additionally, public awareness campaigns and educational programs can drive behavioral changes and encourage the adoption of sustainable mobility solutions.
References
R. Nealer and T. Hendrickson, “Review of recent lifecycle assessments of energy and greenhouse gas emissions for electric vehicles,” Current Sustainable/Renewable Energy Reports, vol. 2, pp. 66–73, 2015.
Z. Zhou, Y. Lai, Q. Peng, and J. Li, “Comparative life cycle assessment of merging recycling methods for spent lithium ion batteries,” Energies, vol. 14, no. 19, p. 6263, 2021.
S. Illikainen, “Environmental impacts of lithium-ion batteries,” B.S. thesis, S. Illikainen, 2022.
G. Majeau-Bettez, T. R. Hawkins, and A. H. Strømman, “Life cycle environmental assessment of lithium-ion and nickel metal hydride batteries for plug-in hybrid and battery electric vehicles,” Environmental science & technology, vol. 45, no. 10, pp. 4548–4554, 2011.
I. Rey, C. Vallejo, G. Santiago, M. Iturrondobeitia, and E. Lizundia, “Environmental impacts of graphite recycling from spent lithium-ion batteries based on life cycle assessment,” ACS Sustainable Chemistry & Engineering, vol. 9, no. 43, pp. 14488–14501, 2021.
D. A. Notter, M. Gauch, R. Widmer, P. Wager, A. Stamp, R. Zah, and H.-J. Althaus, “Contribution of li-ion batteries to the environmental impact of electric vehicles,” 2010.
J. F. Peters, M. Baumann, B. Zimmermann, J. Braun, and M. Weil, “The environmental impact of li-ion batteries and the role of key parameters–a review,” Renewable and Sustainable Energy Reviews, vol. 67, pp. 491–506, 2017.
Y. Gong, Y. Yu, K. Huang, J. Hu, and C. Li, “Evaluation of lithium-ion batteries through the simultaneous consideration of environmental, economic and electrochemical performance indicators,” Journal of Cleaner Production, vol. 170, pp. 915–923, 2018.
A. Ramos, C. Afonso Teixeira, and A. Rouboa, “Environmental analysis of waste-to-energy—a portuguese case study,” Energies, vol. 11, no. 3, p. 548, 2018.
L. M. I Canals, G. Burnip, and S. Cowell, “Evaluation of the environmental impacts of apple production using life cycle assessment (lca): case study in new zealand,” Agriculture, Ecosystems & Environment, vol. 114, no. 2-4, pp. 226–238, 2006.
M. D. Chatzisideris, N. Espinosa, A. Laurent, and F. C. Krebs, Ecodesign perspectives of thin-film photovoltaic technologies: A review of life cycle assessment studies, vol. 156. Elsevier, 2016.
X. Domènech, J. A. Ayllón, J. Peral, and J. Rieradevall, “How green is a chemical reaction? application of LCA to green chemistry,” Environmental science & technology, vol. 36, no. 24, pp. 5517–5520, 2002.
C. De Camillis, M. Brandão, A. Zamagni, and D. Pennington, “Sustainability assessment of future-oriented scenarios: a review of data modelling approaches in life cycle assessment,” Towards Recommendations for Policy Making and Business Strategies, pp. 1–90, 2013.
M. Zackrisson, K. Fransson, J. Hildenbrand, G. Lampic, and C. O’Dwyer, “Life cycle assessment of lithium-air battery cells,” Journal of Cleaner Production, vol. 135, pp. 299–311, 2016.
J. Diekmann, C. Hanisch, L. Froböse, G. Schälicke, T. Loellhoeffel, A.-S. Fölster, and A. Kwade, “Ecological recycling of lithium-ion batteries from electric vehicles with focus on mechanical processes,” Journal of the Electrochemical Society, vol. 164, no. 1, p. A6184, 2016.
G. Shrestha, P. D. Stahl, and L. Ingram, “Influence of reclamation management practices on soil bulk density and infiltration rates on surface coal mine lands in wyoming,” in National Meeting of the American Society of Mining and Reclamation, pp. 1042–1056, ASMR Lexington, KY, 2005.
M. R. Sabour, E. Alam, and A. M. Hatami, “Global trends and status in landfilling research: a systematic analysis,” Journal of Material Cycles and Waste Management, vol. 22, pp. 711–723, 2020.
W. Qiu, Q. Hao, S. H. K. Annamareddy, B. Xu, Z. Guo, and Q. Jiang, “Electric vehicle revolution and implications: ion battery and energy,” Engineered Science, vol. 20, pp. 100–109, 2022.
B. Lu, J. Liu, and J. Yang, “Substance flow analysis of lithium for sustainable management in mainland china: 2007–2014,” Resources, Conservation and Recycling, vol. 119, pp. 109–116, 2017.
S. Kalluri, H. Cha, J. Kim, H. Lee, H. Jang, and J. Cho, “Building high-rate nickel-rich cathodes by self-organization of structurally stable macrovoid,” Advanced Science, vol. 7, no. 7, p. 1902844, 2020.
L. Simonelli, A. Sorrentino, C. Marini, N. Ramanan, D. Heinis, W. Olszewski, A. Mullaliu, A. Birrozzi, N. Laszczynski, M. Giorgetti, et al., “Role of manganese in lithium-and manganese-rich layered oxides cathodes,” The Journal of Physical Chemistry Letters, vol. 10, no. 12, pp. 3359–3368, 2019.
B. Yilmaz and N. B. Harmancioglu, “An indicator based assessment for water resources management in gediz river basin, turkey,” Water Resources Management, vol. 24, pp. 4359–4379, 2010.
Y. Yang, P. D. Erskine, S. Zhang, Y. Wang, Z. Bian, and S. Lei, “Effects of underground mining on vegetation and environmental patterns in a semi-arid watershed with implications for resilience management,” Environmental Earth Sciences, vol. 77, pp. 1–12, 2018.
P. Le Billon and S. Spiegel, “Cleaning mineral supply chains? political economies of exploitation and hidden costs of technical fixes,” Review of International Political Economy, vol. 29, no. 3, pp. 768–791, 2022.
J. A. Aznar-Sánchez, J. J. García-Gómez, J. F. Velasco-Muñoz, and A. Carretero-Gómez, “Mining waste and its sustainable management: advances in worldwide research,” Minerals, vol. 8, no. 7, p. 284, 2018.
C. Di Noi and A. Ciroth, “Environmental and social pressures in mining. results from a sustainability hotspots screening,” Resources, vol. 7, no. 4, p. 80, 2018.
J. A. Diemel and D. J. Hilhorst, “Unintended consequences or ambivalent policy objectives? Conflict minerals and mining reform in the democratic republic of congo,” Development Policy Review, vol. 37, no. 4, pp. 453–469, 2019.
C. Ma, Y. Zhao, J. Li, Y. Song, J. Shi, Q. Guo, and L. Liu, “Synthesis and electrochemical properties of artificial graphite as an anode for high-performance lithium-ion batteries,” Carbon, vol. 64, pp. 553–556, 2013.
P. Liu, L. Xiao, Y. Chen, Y. Tang, J. Wu, and H. Chen, “Recovering valuable metals from linixcoymn1-x-yo2 cathode materials of spent lithium ion batteries via a combination of reduction roasting and stepwise leaching,” 2019.
J. Lin, L. Li, E. Fan, C. Liu, X. Zhang, H. Cao, Z. Sun, and R. Chen, “Conversion mechanisms of selective extraction of lithium from spent lithium-ion batteries by sulfation roasting,” ACS applied materials & interfaces, vol. 12, no. 16, pp. 18482–18489, 2020.
M. Kespe, S. Cernak, M. Gleiß, S. Hammerich, and H. Nirschl, “Three-dimensional simulation of transport processes
within blended electrodes on the particle scale,” International Journal of Energy Research, vol. 43, no. 13, pp. 6762–6778, 2019.
L.Wang, X. Cao, L. Xu, J. Chen, and J. Zheng, “Transformed akhtenskite mno2 from mn3o4 as cathode for a rechargeable aqueous zinc ion battery,” ACS Sustainable Chemistry & Engineering, vol. 6, no. 12, pp. 16055–16063, 2018.
P. Isken, M. Winter, S. Passerini, and A. Lex-Balducci, “Methacrylate based gel polymer electrolyte for lithium-ion batteries,” Journal of power sources, vol. 225, pp. 157–162, 2013.
G. Liu, H. Zheng, A. Simens, A. Minor, X. Song, and V. Battaglia, “Optimization of acetylene black conductive additive and pvdf composition for high-power rechargeable lithium-ion cells,” Journal of The Electrochemical Society, vol. 154, no. 12, p. A1129, 2007.
Y. Wen, L. Shao, P. Zhao, B. Wang, G. Cao, and Y. Yang, “Carbon coated stainless steel mesh as a low-cost and corrosion-resistant current collector for aqueous rechargeable batteries,” Journal of Materials Chemistry A, vol. 5, no. 30, pp. 15752–15758, 2017.
C. Yang, J. Zhang, Q. Jing, Y. Liu, Y. Chen, and C. Wang, “Recovery and regeneration of lifepo4 from spent lithium-ion batteries via a novel pretreatment process,” International Journal of Minerals, Metallurgy and Materials, vol. 28, pp. 1478– 1487, 2021.
J. Cheng, Y. Zhang, T. Wang, H. Xu, P. Norris, and W.-P. Pan, “Emission of volatile organic compounds (vocs) during coal combustion at different heating rates,” Fuel, vol. 225, pp. 554–562, 2018.
M. Weeber, J. Wanner, P. Schlegel, K. P. Birke, and A. Sauer, “Methodology for the simulation based energy efficiency assessment of battery cell manufacturing systems,” Procedia Manufacturing, vol. 43, pp. 32–39, 2020.
L. Gaines, J. Sullivan, A. Burnham, and I. Belharouak, “Life-cycle analysis of production and recycling of lithium ion batteries,” Transportation research record, vol. 2252, no. 1, pp. 57–65, 2011.
T. Li and M. Dong, “Online control for energy storage management with renewable energy integration,” in 2013 IEEE International Conference on Acoustics, Speech and Signal Processing, pp. 5248–5252, IEEE, 2013.
Y. Poussade, F. Vince, and C. Robillot, “Energy consumption and greenhouse gases emissions from the use of alternative water sources in south east queensland,” Water Science and Technology: Water Supply, vol. 11, no. 3, pp. 281–287, 2011.
C. S. Cheng, W. R. Liu, and F. M. Wang, “A novel ionic host solid electrolyte interface formation on reduced graphene oxide of lithium ion battery,” Electrochimica Acta, vol. 106, pp. 425–431, 2013. 50
M. A. Rajaeifar, M. Raugei, B. Steubing, A. Hartwell, P. A. Anderson, and O. Heidrich, “Life cycle assessment of lithium-ion battery recycling using pyrometallurgical technologies,” Journal of Industrial Ecology, vol. 25, no. 6, pp. 1560–1571, 2021.
S. Van Ewijk, J. A. Stegemann, and P. Ekins, “Global life cycle paper flows, recycling metrics, and material efficiency,” Journal of Industrial Ecology, vol. 22, no. 4, pp. 686–693, 2018.
Y. Li, J. Song, and J. Yang, “A review on structure model and energy system design of lithium-ion battery in renewable energy vehicle,” Renewable and Sustainable Energy Reviews, vol. 37, pp. 627–633, 2014.
C.-H. Lee and C.-H. Wu, “A novel big data modeling method for improving driving range estimation of evs,” IEEE Access, vol. 3, pp. 1980–1993, 2015.
M. Noussan, R. Roberto, and B. Nastasi, “Performance indicators of electricity generation at country level—the case of italy,” Energies, vol. 11, no. 3, p. 650, 2018.
Q. Kong, M. Fowler, E. Entchev, H. Ribberink, and R. McCallum, “The role of charging infrastructure in electric vehicle implementation within smart grids,” Energies, vol. 11, no. 12, p. 3362, 2018.
P. Kumar and S. Chakrabarty, “Total cost of ownership analysis of the impact of vehicle usage on the economic viability of electric vehicles in india,” Transportation Research Record, vol. 2674, no. 11, pp. 563–572, 2020.
K. Uddin, T. Jackson, W. D. Widanage, G. Chouchelamane, P. A. Jennings, and J. Marco, “On the possibility of extending the lifetime of lithium-ion batteries through optimal v2g facilitated by an integrated vehicle and smart-grid system,” Energy, vol. 133, pp. 710–722, 2017.
N. C. Onat, M. Kucukvar, and O. Tatari, “Conventional, hybrid, plug-in hybrid or electric vehicles? state-based comparative carbon and energy footprint analysis in the united states,” Applied Energy, vol. 150, pp. 36–49, 2015.
E. Bulut and M. C. Kisacikoglu, “Mitigating range anxiety via vehicle-to-vehicle social charging system,” in 2017 IEEE 85th Vehicular Technology Conference (VTC Spring), pp. 1–5, IEEE, 2017.
Z. Tian, L. Tu, C. Tian, Y.Wang, and F. Zhang, “Understanding battery degradation phenomenon in real-life electric vehicle use based on big data,” in 2017 3rd International Conference on Big Data Computing and Communications (BIGCOM), pp. 334–339, IEEE, 2017.
F. Wang, T. Zhang, Y. He, Y. Zhao, S. Wang, G. Zhang, Y. Zhang, and Y. Feng, “Recovery of valuable materials from spent lithium-ion batteries by mechanical separation and thermal treatment,” Journal of cleaner production, vol. 185, pp. 646–652, 2018.
Y. Yu, B. Chen, K. Huang, X. Wang, and D. Wang, “Environmental impact assessment and end-of-life treatment policy analysis for li-ion batteries and ni-mh batteries,” International journal of environmental research and public health, vol. 11, no. 3, pp. 3185–3198, 2014.
S.-S. Lin and K.-H. Chiu, “An evaluation of recycling schemes for waste dry batteries–a simulation approach,” Journal of Cleaner Production, vol. 93, pp. 330–338, 2015.
M. P. Krekeler, H. A. Barrett, R. Davis, C. Burnette, T. Doran, A. Ferraro, and A. Meyer, “An investigation of mass and brand diversity in a spent battery recycling collection with an emphasis on spent alkaline batteries: Implications for waste management and future policy concerns,” Journal of Power Sources, vol. 203, pp. 222–226, 2012.
E. Gratz, Q. Sa, D. Apelian, and Y. Wang, “A closed loop process for recycling spent lithium ion batteries,” Journal of Power Sources, vol. 262, pp. 255–262, 2014.
Environmental management: life cycle assessment; Principles and Framework. ISO, 2006.
R. Tolomeo, G. De Feo, R. Adami, and L. Sesti Osséo, “Application of life cycle assessment to lithium ion batteries in the automotive sector,” Sustainability, vol. 12, no. 11, p. 4628, 2020.
M. P. Mahmud, N. Huda, S. H. Farjana, and C. Lang, “Comparative life cycle environmental impact analysis of lithium-ion (liio) and nickel-metal hydride (nimh) batteries,” Batteries, vol. 5, no. 1, p. 22, 2019.
L. Unterreiner, V. Jülch, and S. Reith, “Recycling of battery technologies–ecological impact analysis using life cycle assessment (lca),” Energy Procedia, vol. 99, pp. 229–234, 2016.
Q. Wang, W. Liu, X. Yuan, H. Tang, Y. Tang, M. Wang, J. Zuo, Z. Song, and J. Sun, “Environmental impact analysis and process optimization of batteries based on life cycle assessment,” Journal of cleaner production, vol. 174, pp. 1262–1273, 2018.
R. Faria, P. Marques, P. Moura, F. Freire, J. Delgado, and A. T. De Almeida, “Impact of the electricity mix and use profile in the life-cycle assessment of electric vehicles,” Renewable and Sustainable Energy Reviews, vol. 24, pp. 271–287, 2013. 51
Y. Gupt and S. Sahay, “Review of extended producer responsibility: A case study approach,” Waste Management & Research, vol. 33, no. 7, pp. 595–611, 2015.
L. Rubino, C. Capasso, and O. Veneri, “Review on plug-in electric vehicle charging architectures integrated with distributed energy sources for sustainable mobility,” Applied Energy, vol. 207, pp. 438–464, 2017.
H. Ambrose, D. Gershenson, A. Gershenson, and D. Kammen, “Driving rural energy access: a second-life application for electric-vehicle batteries,” Environmental Research Letters, vol. 9, no. 9, p. 094004, 2014.
J. F. Peters, M. Baumann, and M. Weil, “The importance of recyclability for the environmental performance of battery systems,” in Cascade Use in Technologies 2018: Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft– Oldenburg 2018, pp. 104–110, Springer Berlin Heidelberg, 2019.
Downloads
Published
How to Cite
License
Copyright (c) 2023 Journal of Computers, Mechanical and Management
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Journal of Computers, Mechanical and Management applies the CC Attribution- Non-Commercial 4.0 International License to its published articles. While retaining copyright ownership of the content, the journal permits activities such as downloading, reusing, reprinting, modifying, distributing, and copying of the articles, as long as the original authors and source are appropriately cited. Proper attribution is ensured by citing the original publication.
Accepted 2023-08-11
Published 2023-08-31
The journal is licensed under an 